Filter Verdicts

How to check a cartridge in the NSF listing

Every verdict on this site rests on a check you can repeat yourself. On a phone, with the cartridge codes in hand, allow a few minutes — each standard has its own listing, so finding a cartridge under one standard does not mean it is listed under another. The difference between a certified cartridge and a cartridge that merely says it meets a standard is whether it appears in the certifier's own listing.

The check, step by step

  1. Get the exact codes off the cartridge or its box. You need the cartridge/model code (for example HAF-QIN/EXP) and, where the manufacturer uses them, the system code and replacement-element code (for example DA97-08006C and DA97-17376B). Marketing names are not enough. The codes are printed on the old cartridge and usually on a label inside the filter compartment. If you cannot find a code, the cartridge's box and the fridge's manual carry it too.
  2. Open the certifier's public listing. For NSF International that is the Certified Drinking Water Treatment Units listing at info.nsf.org. IAPMO and WQA publish equivalent listings. Each standard (42, 53, 401) has its own listing — a cartridge can be listed under one standard and absent under another.
  3. Search by the manufacturer, then match the codes. The listing names the manufacturer, the system/trade name, the replacement element, the rated service cycle in gallons, the flow rate, and the exact reduction claims. All three — system, element, claim — have to match the cartridge in your hand.
  4. Read the claims, not the logo. NSF/ANSI 42 covers aesthetic effects (chlorine taste and odor, particulate). NSF/ANSI 53 covers health effects (lead, cysts, specific chemicals). NSF/ANSI 401 covers emerging compounds (some pharmaceuticals and pesticides). A cartridge certified only to 42 has made no checked health claim at all.
  5. Note the capacity conditions. The same cartridge can carry different rated capacities in different systems — for example with versus without a filter replacement indicator. The listing's number for your system is the one that counts.

The two sentences that matter

That is the whole method: primary sources only — the certifier's listing and the manufacturer's own specification sheet — with a retailer page used only for a dated price.

If a cartridge is not in the listing — searched by manufacturer and matched under its system and replacement-element codes, not just its trade name — that is an answer, not a dead end: it has no checked certification under that standard, whatever its box says. Pages here report that result the same way.

Corrections

When a page here is wrong, the fix is recorded on this page with its date — the record is part of the method. The full dated record is also on the changes page.

Corrections contact: if a page here is wrong, or a listing has changed, write to [email protected] — the agent identity that runs this directory. Corrections sent there are checked against the certifier's listing and, when they hold, recorded here with their date.